Sökresultat

In this study, two methods for wastewater treatment plant (WWTP) dimensioning were compared: (1) a traditional guideline-based approach, and (2) a mechanistic model-based approach. The design outputs depended on uncertainties in correlated influent concentrations, which emphasises the importance of uncertainty analysis. The results showed that model-based design could simplify and reduce the time

Drawing on the review of quality assurance policies in higher education already set out of the introduction, this chapter explores the impact of national quality assurance processes adopted to aid consistency in the judgement of academic standards in UK higher education. Specifically, it will examine the ways in which the processes adopted to support marking and to moderate marks, known collective

In this paper, two fundamentally different urban wastewater systems are assessed from an environmental impact perspective. One system represents a centralised, high-tech, end-of-pipe structure c whereas the second system is primarily based on source-separation strategies. Using material flow analysis a in combination with evaluation methods based on life-cycle assessment the systems are evaluated

We have measured the interaction cross sections (σI) of 31–40Ar and 31–37Cl on carbon targets at energies of around 950 A MeV. The effective matter radii for these nuclei were deduced by a Glauber-model analysis. Combining our matter radii with measured charge radii for Ar isotopes, we could deduce the proton-skin thicknesses for the 32–40Ar isotopes, which were found to increase monotonically wit

Lifetime measurements have been made for the radiation emitted in the ground term transitions of the nominal form 5s(2)5p(6)5d(x)6s-5s(2)5p(6)5d(x)6p in Ta II (x = 3), W II (x = 4), and Re II (x = 5). Supporting theoretical calculations have also been performed to characterize configuration interaction and to estimate the degree of decay branching of the upper levels. The lifetime measurements hav

An alpha/beta barrel is predicted for the three-dimensional (3D) structure of Bacillus subtilis ferrochelatase. To arrive at this structure, the THREADER program was used to find possible homologous 3D structures and to predict the secondary structure for the ferrochelatase sequence. The secondary structure was fit by hand to the selected homologous 3D structure then the MODELLER program was used

A flow-through microdispenser has been coupled to a micro HPLC separation system and used as a solvent elimination interface for Fourier transform infrared (FTIR) and Raman spectroscopic detection of the separated compounds. Using the microdispenser picoliter sized droplets can be generated and deposited on an appropriate target placed on a computerized x, y-stage. Evaporation of volatile solvent

This paper presents a model for reversed-phase purification of insulin from desamido insulin. The system is described by a reaction dispersive model with a competitive Langmuir isotherm. A model building and calibration method is presented and the model's region of validity is defined. The model is calibrated using only two-component experiments on the raw mixture by the inverse method and then ex

Forestry in Sweden suffers from browsing damage caused by large herbivores, mainly moose (Alces alces) and roe deer (Capreolus capreolus). Silviculture affects the availability of forage for these animals, and thus the browsing pressure. A step towards modeling the response of trees or to predict browsing damage is to gain more knowledge on the availability of food in forest stands. Individual gap

A seismic approach is used to estimate the thickness and elastic stiffness constants of asphalt or concrete slabs. The overall concept of the approach utilizes the robustness of the multichannel seismic method. A multichannel-equivalent data set is compiled from multiple time series recorded from multiple hammer impacts at progressively different offsets from a fixed receiver. This multichannel si

Wave cycles, i.e. pairs of local maxima and minima, play an important role in many engineering fields. Many cycle definitions are used for specific purposes, such as crest-trough cycles in wave studies in ocean engineering and rainflow cycles for fatigue life prediction in mechanical engineering. The simplest cycle, that of a pair of local maximum and the following local minimum is also of interes

The Multi-plume Aerosol dynamics and Transport (MAT) model has been developed to study the dynamics of the particle size distribution in urban environments. The MAT model uses a novel multi-plume scheme for vertical dispersion and routines of the aerodynamics models AERO3. It treats the processes: emission from a near ground source, dilution with background air, deposition, coagulation and condens

In Sweden today, power production with bioenergy systems is more costly than with fossil energy systems. New technology under development, such as integrated gasification and combined cycle technology (IGCC), and reduced biomass costs would improve the competitiveness of bioenergy systems. The CO2 mitigation costs are lower for biomass systems using IGCC technology than for natural gas systems usi