Filtyp
Use of feedforward can alleviate feedback and adaptive actions. Feedforward signals can be generated from reference models and the same models can also be used as reference models in adaptive control. A method for designing the reference models is presented in the paper. By exploiting the structure of the equations describing air vehicles it is possible to find reference models that scale to the p
The ac frequency in electrical power systems is conventionally regulated by synchronous machines. The gradual replacement of these machines by asynchronous renewable-based generation, which provides little or no frequency control, increases system uncertainty and the risk of instability. This imposes hard limits on the proportion of renewables that can be integrated into the system. In this paper,
Biogenic volatile organic compounds (BVOCs) play essential roles in tropospheric chemistry, on both regional and global scales. The emissions of large quantities of species-specific BVOC depend not only on environmental (temperature, T; photosynthetically active radiation, PAR), but also physiological parameters (i.e. net photosynthetic rate, Pn; transpiration rate, Tr; stomatal conductance, gs an
This paper presents a real-time hand gesture recognition system by accelerating a convolutional neural network (CNN) using FPGA platform. More specifically, ZynqNet is adopted and modified to fulfill the classification task of recognizing the Swedish manual alphabet, which is used by sign language users for spelling purposes, also known as fingerspelling. Data augmentation and transfer learning te
This paper presents a continuous-time ΔΣ ADC in a 28nm-FDSOI CMOS technology. The ADC is clocked at 5GHz with a signal bandwidth of 250 MHz, for an oversampling ratio (OSR) of only 10. The conversion from high-level model to circuit-level implementation requires multiple high-speed design methodologies and a careful layout. A 4th order loop filter is adopted to enhance quantization noise shaping i
In this paper, we study event-based PID control from an optimal stochastic control perspective. The purpose is to better understand what implementation features are critical for achieving good event-based PID performance. For this end, we formulate an LQG control design problem for a double integrator process with an integral disturbance, where the solution is an ideal PID controller. We then cons
Signals are physical variables or quantities measured at various parts of a system, which when processed yield the desired information. A wide variety of signals are often encountered in describing many practical systems. Electrical signal, in form of current and voltage, is the most easily measured quantity, hence the need to use sensors and transducers to transform other non-electrical quantity
Controlled invariant set and viability regulation of dynamical control systems have played important roles in many control and coordination applications. In this paper we develop a \textit{temporal} viability regulation theory for general dynamical control systems, and in particular for control affine systems. The time-varying viable set is parameterized by time-varying constraint functions, with
The IEEE Std. P1687.1 working group is currently exploring alternatives to IEEE Std. 1149.1 test access port (TAP) as the interface between the boundary of integrated circuits (ICs) and IEEE Std. 1687 networks. In this paper, we investigate the use of universal asynchronous receiver-transmitter (UART) to access IEEE Std. 1687 networks. We have developed a protocol to describe the information trans
Devices sharing a network compete for bandwidth, being able to transmit only a limited amount of data. This is for example the case with a network of cameras, that should record and transmit video streams to a monitor node for video surveillance. Adaptive cameras can reduce the quality of their video, thereby increasing the frame compression, to limit network congestion. In this paper, we exploit
With growing traffic demands, transportation networks become more and more congested and prone to disruptions. In this paper, we study how different perturbations affect the free flow equilibria, i.e., equilibria where no congestion effects are present, in transportation networks. More specifically, if and when the equilibrium of the perturbed dynamics is still in free flow. A generalized cell tra
This paper proposes a first-principle model of GPS receivers, that allows us to exploit the trade-off between battery consumption and positioning accuracy. We present the model and propose a GPS sampling strategy that uses both the current positioning confidence, and information about the GPS status. We complement the GPS sensor with internal measurement units and show how the given model exposes
The real-time implementation of periodic controllers requires solving a co-design problem, in which the choice of the controller sampling period is a crucial element. Classic design techniques limit the period exploration to safe values, that guarantee the correct execution of the controller alongside the remaining real-time load, i.e., ensuring that the controller worst-case response time does no
This paper presents JitterTime, a small Matlab toolbox for calculating the transient performance of a control system in non-ideal timing scenarios.Such scenarios arise in networked and embedded systems, where several applications share a set of limited and varying resources.Technically, the toolbox evaluates the time-varying state covariance of a mixed continuous/discrete linear system driven by w
In this data article, we report real-world data on multichannel connectivity and videotransmission carried on commercial 3G/4G networks in the region of Skåne, southern Sweden. The data reported here complement the research article “Technical feasibility and ambulance nurses’ view of a digital telemedicine system in pre-hospital stroke care – A pilot study” (1). The dataset was originally collecte
We consider a broad class of stochastic imitation dynamics over networks, encompassing several well known learning models such as the replicator dynamics. In the considered models, players have no global information about the game structure: they only know their own current utility and the one of neighbor players contacted through pairwise interactions in a network. In response to this information
The IEEE Control Systems Society (CSS) Technical Committee on Networks and Communication Systems (TC-NCS) focuses on areas that involve the interplay among networks, communication, and systems control. The TC is organized into eight working groups, Control of Network Systems, Information Networks and Control, Networked Sensing and Sensor Networks, Optimization and Game Theoretic Methods in Network
